Meizu M351 - Manual (Page 21)

Phone
Before making a call, please make sure that there is network connection.
Tap Phone icon to launch the Phone app.
Dialing a number
• Direct dialing
Tap to open the dial pad, then enter a number and tap to call.
Use the button to correct any mistakes. If the phone number is from
a saved contact, the contact name will be displayed on the dial screen.
After entering a number tap to "Add to new contact" or "Add to
existing contact".
• Make a call from History
Tap to view recent call history list. Tap the avatars or icons on the left
side can call back immediately.
Answering the phone
When there is an incoming call, the contact information of the incoming caller is
displayed, together with a ringtone or vibration. Drag the icon to to answer
the call, and drag it to to reject the call.
While answering the phone, users can carry out the following operations:
• Tap button to enter Contacts list and check contacts' information;
• Tap to shutdown microphone for current call so the caller cannot hear
users' voice;
• Tap to hold current call if possible under the current network;
• Tap to record current call as audio; users can find and play the audios
in folder Files>Storage>Recorder>Call.
• Tap to save the number users just input, which can be dialed directly
after users' current call;
• Tap to activate dial pad, which can be used to input information that
required by auto voice response system.
• Tap to enable the loudspeaker;
• Tap to end the call.
Adjust the receiver volume
During a call, users can press the volume key on the left side of the
phone to adjust volume of the receiver. Press up key to volume up and press
the lower key to volume down.
App Guide 21
App Guide