Dual XD1215 - Manual (Page 7)

7
XD1215 OPERATION
Tuner Operation
Press TUNE << or >> momentarily to seek the next strong
station.
Press TUNE
<<
or
>>
for more than 2 seconds, then
release. “MANU” will momentarily appear in the display.
Press TUNE
<<
or
>>
momentarily to move radio frequency
up or down one step at a time. Press and hold to advance
quickly. If tuning is not adjusted for 5 seconds, the unit
will return to seek tuning mode (default). “AUTO” will
momentarily appear in the display.
Press MO/ST for more than 2 seconds during FM tuner
operation to select mono or stereo (default) reception of the
broadcast signal.
Press BAND to select between FM1, FM2, FM3 and AM1, AM2
bands.
Press and hold BAND then press TUNE << to select
European frequency spacing. Press and hold BAND then
press TUNE
>> to select USA frequency spacing (default).
Anytime frequency spacing is changed, all station presets
are erased.
Up to 18 FM stations and 12 AM stations can be stored.
To store a station, select the desired band and station.
Press and hold the desired preset button for more than 2
seconds. When stored, the preset number will appear in the
display. The station can be recalled anytime by pressing the
corresponding preset button.
Press AS/PS for more than 2 seconds to automatically store
the six strongest stations in the current band.
Press AS/PS for less than 2 seconds to scan presets
1-6 on the current band, pausing for 5 seconds at each.
Press AS/PS again to cancel.
Seek Tuning
Manual Tuning
FM Mono/Stereo
Band
Frequency Spacing
Storing and Recalling
Station Presets
Automatically Store
Stations
Preset Scan