Permasteel PS-200 User Manual
Page 2
ASSEMBLY INSTRUCTIONS:
TOOLS REQUIRED:
#2 Phillips screwdriver
Allen wrench
Please read the cooler manual carefully and assemble according to following steps.
TOOLS REQUIRED
#2 Philips screwdriver
ASSEMBLY INSTRUCTIONS
1.
Please make sure all parts are accounted for before beginning assembly
2.
Insert handle (part G) to left Leg (part C), tighten with 2 screws (part L) each (shown in Fig.1 insert), Repeat
the same step with right side (parts B&F).
3.
Attach left leg assembly (parts C+G) to the main basin (partA); using 4pcs truss screws (part K) as shown in
Fig. 1. Repeat same step for right leg assembly (parts B+F)
4.
Attach 2 casters with brake (part E) on left leg assembly by screwing into leg insert, attach 2 casters (part D)
to right leg assembly
5.
Attach bottle-cap catcher (H) to main basin by sliding it down over pre-installed bolts,
6.
Attach bottle opener (I) to main basin using 2pc screws as shown in Fig. 2 insert
7. Clean inside of cooler completely with soft dry towel your cooler is now ready for use.