To erase recordings, Quick record start, To erase recordings quick record start – Paso Sound P202MKV User Manual

Page 17: Important safety instructions, 4 − recording

IMPORTANT SAFETY INSTRUCTIONS

TASCAM 202

4 − Recording

8. When everything is ready, start recording by

pressing the

PAUSE

key or the

PLAY

key whose

arrow points in the same direction as the indi-
cator.

To record on both tape sides, set the

REV MODE

switch to

and press the forward

PLAY

(y) key. If you press the reverse

PLAY

(h) key,

recording will be done only on side “B”.

To stop recording, press the

STOP

(

) key.

A To stop recording temporarily

Press the

PAUSE

key to stop recording temporarily.

A second press of the key resumes recording.

To erase recordings

When you make a recording, the tape is overwritten
(previous recording is erased). To erase a tape without
making a new recording, set the

INPUT

control to the

minimum (0) position and press the

RECORD

(º)

key

followed by the

PLAY

(h or y) key.

Quick record start

Hold down the

RECORD (º)

key and press the

PLAY

(h or y) key corresponding to the direction you
want the tape to run.