Paslode T250S-F16 16 Gauge Straight Finish Air Nailer - Manual (Page 3)

TOOL SPECIFICATIONS
MODEL NO.
T250S-F16 (Part# 501680)
HEIGHT
11.3"
WIDTH
3.1"
LENGTH
11.5"
WEIGHT
3.9lbs.
OPERATING PRESSURE
80 to 120 p.s.i. (5.5 to 8.3 bars)
ASSEMBLY HARDWARE SYSTEM
Metric
FASTENER SPECIFICATIONS
TOOL AIR FITTINGS
:
This tool uses a 1/4” N.P.T. male plug. The inside diameter should be .28” (7mm)
or larger. The fitting
must be capable of discharging tool air pressure when
disconnected from the air supply.
OPERATING AIR PRESSURE:
80 to 120 p.s.i. (5.5 to 8.3 bars). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
NAIL LENGTH
3/4" - 2-1/2"
SHANK DIAMETER
16 gauge
TOOL AND FASTENER SPECIFICATIONS
3