DigiTech RP255 - Manual (Page 18)

12
Getting Started
Making Connections
There are several different connection options available with the RP255. Before connecting the
RP255, make sure that the power to your amplifier and the RP255 is turned off. There is no
power switch on the RP255. To turn the RP255 on or off, connect or disconnect the included
PS0913B power supply from the Power Input jack.
Mono Operation - Amplifier
Connect your guitar to the Input of the RP255. Connect a single mono instrument cable from
the Left (Mono) output of the RP255 to the instrument input or effect return on your amplifier.
Set the Amp/Mixer switch to Amp.
Guitar Amp Input/Effect Return
Left (Mono)
Output
Input
Amp/Mixer
switch set to
Amp.
NOTE: When using a
guitar amp, it may be best
to connect the guitar to the
Input of the RP255 and the
Output of the RP255 to the
effect return of the amplifier.