Osoto NV-1920 - Manual (Page 20)

- 19 -
the state of waiting, continually press buttons four times,
and press button into state of infrared decoding. At this
time, users will hear a voice of
“Bee”, all indicators will be on to
start operation;
2. Put visual presenter
’s remote controller opposite to
receiver window, press button on remote controller, hears of
a voice of “Bee” shortly, and indicators will be off;
3.
Put DVD’s remote controller opposite to visual presenter’s
infrared receiver window, press
“MENU” button, will hear of a
voice of “Bee” shortly, indicators will be on
4. After decoding, turn off power, infrared decoding has been
finished successfully.
Another example:
The steps of decoding
projector’s “Remote Controller” are as
follows:
1. Press button five times when visual presenter is in
the state of waiting, then press buttons four times, and
press button into state of infrared decoding. At this time,
users will hear a voice of
“Bee”, all indicators will be on to start
operation;
2. Put visual presenter
’s remote controller opposite to remote
receiver window, press button on remote controller, will hear
of a voice of “Bee” shortly, and indicators will be off;
3.
Put projector’s remote controller opposite to visual
presenter’s infrared receiver window, press “Power” button, and