Osburn OB01151 User Manual
Page 29
29
4.6 Fan Maintenance & Care
Clean the fan air inlet louvers and squirrel cage impeller regularly. The fan should be kept clean and
dust free. Life of the fan will be shortened if operated in a dust filled environment, or if the fan is
overheated by restricting air supply. Stalling the rotor, or over firing the insert with the fan turned
off will also damage the fan. The fan must not be overheated. Do not disassemble the fan.
"ALTERING OR TAMPERING WITH THE FAN WILL VOID THE
WARRANTY".
4.7 Removal instructions
To remove your insert :
•
Remove the coil handle attached to the air intake control
•
Remove the four screws attaching the faceplate to the insert
•
Remove the faceplate by pulling on it
•
Unclip the ash pan
•
Unclip the blower assembly
•
Remove the three screws securing the pipe connector
ASH PAN
BLOWER
ASSEMBLY
COIL
HANDLE
AIR INTAKE
CONTROL
FACEPLATE