Oregon BAR218HG User Manual
Page 8
8
EN
PAIRING YOUR WEATHER STATION
First of all, you need to pair
your weather station with your
mobile device. will flash
on the screen of the weather
station while pairing and be on
after successful pairing.
Press to enable a pair-up for the main unit for 30
seconds.
1. Tap
to enter
SETTINGS screen
. Tap on
STATION area.
3. Tap
Pair Up. Searching… displays. If you want to
cancel the pairing, tap
Cancel.
4. Once the pairing is successful, it will return to
STATION screen.
5. Tap on each channel to rename it. (Up to 0
characters including space are allowed). Tap
if completed. Tap
to exit.
To remove sensor:
To remove any sensor from the weather station, Tap
Remove Station on STATION screen, all the sensors
will be removed at the same time.
To reposition the sensors
on screen:
1. On
STATION screen, tap
.
. Press and hold
at the
right side of a sensor. Drag
it to your desired position.
3. Tap
to confirm.
SETTINGS
You can set your weather station through the
application, such as measurement units.
The settings are as follows:
• Temperature
• Barometric
• Rainfall (not available in BAR18HG)