DCS MO-24SS - Manual (Page 11)

10
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, will appear in the display.
Touch the STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show WELCOME PRESS CLEAR AND PRESS
CLOCK
after the power is reinstated. If this occurs
during cooking, the program will be erased. The time
of day will also be erased. Simply touch STOP/
CLEAR pad and reset the clock for the correct time
of day.
ERROR
• Before operating your new microwave oven make sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will show WELCOME PRESS CLEAR AND PRESS CLOCK.
2. Touch the STOP/CLEAR pad. will appear.
3. Set clock.
:
Before Operating
Touch TIMER/CLOCK pad
and number 2 pad.
Touch TIMER/CLOCK
pad again.
Enter the correct time
of day by touching the
numbers in sequence.
1 2 3 0
2
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E D I S P L A Y
1
2
3
STOP/CLEAR
TIMER
CLOCK
TIMER
CLOCK
ENTER
TIME OF
DAY
12:30
12:30
Untitled-1 6/9/04, 3:13 PM 10