OpenEye iPad MDVR - Manual (Page 4)

Commercial Recorder (E-Series)
Verify that the E-Series recorder is connected to the network.
Press
Setup on the front panel or IR remote control, and then go
to Network > Network Settings and verify the network settings. If
you are accessing the recorder from outside your network (using
3G/4G or public Wi-Fi), verify that the correct ports are forwarded
to the recorder (the default ports necessary for remote connections
are 2000 and 2002).
Professional Recorder (N, H, X, Xr-Series)
Verify that the recorder is connected to the network. Enter Setup
on the recorder, and then click Network Setup to verify the
network settings. If you are accessing the recorder from outside
your network (using 3G/4G or public Wi-Fi), verify that the correct
ports are forwarded to the recorder (the default ports necessary for
remote connections are 2000 and 2002).
1. From your Apple iPad, tap the App Store icon.
Note To install an application from the App Store, you must
have a valid Apple iTunes account.
2. Tap Search and type OpenEye MDVR HD .
3. Follow the instructions to download and install the application.
4. When the application is successfully installed, the OpenEye
icon will appear on the device.