Doro CONGRESS 205 - Manual (Page 5)

English
EN 2
Installation
Changing the clock, alarm settings, language or contrast
If you wish to alter the clock, alarm, language or contrast settings at a later point
please refer to Connection/Initial programming (steps 5-12) on page 1.
The display
In standby mode the date and time, number of new and total number of calls
stored in the Caller ID memory will be displayed.
Ringer
The ringer volume, melody and tone can be selected using the switches located
on the underside of the telephone:
e
Ring volume
n
Ring melody
Ringer tone
Labels/protective cover
The back cover is fastened by 2 pieces of plastic and secured by two screws,
these have to be removed first.
Information such as a company logo can be placed under the protective cover.
This is especially useful where the back of the telephone is facing a customer/
visitor on a reception desk.
The memory index cover can also be removed by carefully prising the right
hand side of the cover using a small flat blade screwdriver.