OpenEye OE4 R-Series - Manual (Page 15)

30233AA 15
MONITOR SETUP
The recorder has the following connections available to attach a monitor.
DVI Output
To Digital Display
or use included adapter to connect to SVGA monitor
HDMI Output To Digital Display
You can connect up to two monitors on each video card for a maximum of four monitors.
Attach the monitor or monitors to the rear of the recorder using the cable supplied by the monitor
manufacturer. Refer to the monitor manual for detailed information on how to setup and use it.
Note
The recommended resolution of the connected monitor is 1280x1024 or 1680x1050.
POWER SETUP
WARNING:
To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug receptacle
contact a licensed electrician to have it replaced with a grounded electrical
outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
Disconnect the power from the computer by unplugging the power cord either
from the electrical outlet or the computer.