Onwa Marine Electronics KV-300 - Manual (Page 27)

10. CUSTOMIZATION
10.1 Log (list o f r egistered c alls)
With this menu you can consult a directory of the latest registered incoming
calls, like you do with your cellular phone.
Hold down MENU/SELECT till the display shows DSC CALL
Push MENU/SELECT as confirmation
Select LOG, with the UP/DOWN keys and confirm pushing MENU/SELECT
again
Now you can see the list of the latest incoming calls.
To get further information select the desired message by pushing MENU/SELECT;
coordinates, time and sender ID will be shown.
In radio mode, the display indicates LOG
When it s fixed, indicates that some messages are present in the register of the
latest calls; if it blinks, indicates that there are some messages which have not
been read yet.
'
10.2 Dir (Entries i n t he d irectory)
You can insert into the directory the MMSI codes from frequently called stations,
by giving them a name (e.g. vessel or owner). Then you can search and use them
more comfortably. When receiving a call, the MMSI owner name instead of the
MMSI code will be displayed.
To add new MMSI codes follow this procedure:
Hold down MENU/SELECT till DSC CALL is displayed
Select SET UP with the UP/DOWN keys and confirm by pushing MENU/
SELECT again
Select DIR with the UP/DOWN keys and push MENU/SELECT as confirmation
With the UP/DOWN buttons, select: NEW for new addresses and DELETE ALL
to cancel all of them.
If you push again the UP/DOWN buttons you will see the addresses previously
stored.
Confirm the function you want to select (NEW - DELETE ALL)
Scroll the UP/DOWN keys to insert a new name.
Hold down MENU/SELECT to insert the ID identifier code.
To return to radio mode, push PTT, select EXIT in every menu or wait for 1 second
and the radio will automatically exit.
23