Onwa Marine Electronics KS-200A - Manual (Page 18)

7. Connect to PC
You could use delivered cable (KS2-data2) to connect AIS data to PC as
following diagram:
8. DATA SERIAL PORT
The default baud rate of the data link is 38.4kBaud with 8 data bits, one
stop bit and no parity. The data interface conforms to IEC 61162-1.
The sent messages are VDM, VDO, RMC,and GSA are conform to
NMEA 0183. Please refer to NMEA 0183 for full details of these AIS
messages.
1.5M
9-pin serial port of the computer
2
-Receive data
KS-200A/B
2- Orange- TX Data
3- Green- RX Data
5- Black- GND
3
-Send data
5
-GND
DB9 (Male) DB9 (Female)
14