Olson Technology OTUC-4XX - Manual (Page 3)

025-000557 REV x1 Page 3
OTUC-400 Series Specifications
RF PERFORMANCE PARAMETERS:
Input Frequency Range (4 Inputs) 5 MHz to 42 MHz
Output Spectrum (stacked) 5 MHz to 206.5 MHz
(Spectrum Inverted on Bands 2,3 & 4) Band 1 - 5 MHz to 42 MHz (non-converted)
Band 2 - 51.5 MHz to 88.5 MHz
Band 3 - 121.5 MHz to 158.5 MHz
Band 4 - 169.5 MHz to 206.5 MHz
Frequency Accuracy Each converted band phase locked to internal 4.5 MHz pilot
Gain (each input to combined output) 15 db +/- 1 dB
Gain Flatness < 3 dB in any band
Noise Figure 14 dB maximum
Maximum Input Signal +15 dBmV/carriers (6 carriers)
Phase Noise > -110dBc Hz @ 10 KHz
Input Return Loss > 15 dB (5 MHz to 42 MHz)
Output Return Loss > 15 dB (5 MHz to 206.5 MHz)
3 rd Order I.M. @ +15 dBmV Input/Carrier > 55 dB; typically > 60 dB (6 carriers)
2 nd Order I.M. @ +15 dBmV Input/Carrier > 55 dB (6 carriers)
L.O. Rejection Band 2 - 93.5162 MHz > 15 dB
(Measured relative to Input Band 3 - 163.5469 MHz > 15 dB
Carriers @ +15 dBmV/carrier) Band 4 - 211.500 MHz > 15 dB
Image Rejection Band 2 - 98.5 MHz to 133.5 MHz
(55 dB minimum; 60 dB typical) Band 3 - 168.5 MHz to 203.5 MHz
Band 4 - 216,5 MHz to 251.5 MHz
Pilot Output 4.5 MHz @ +25 dBmV
ENVIRONMENTAL PARAMETERS:
Power Requirements Univeral Power, 100-240 VAC @ 16 Watts
Size (Upconverter) 1.25"H x 19"W x 13"D
Operating Temperature Range -40 to +85 degrees C (-40 to +185 degrees F)