Olson Technology LCP-500-550 - Manual (Page 9)

025-000235 REV B Page 9
5) F.C.C. OFFSET ADJUSTMENT
F.C.C. offset frequencies are shown in Table 2 and summarized on the card attached to the cover plate. To
adjust the frequency of a particular channel to provide the correct F.C.C. offset, look up it’s offset fre
quency in Table 2 (or use the summary attached to the cover plate). Connect a frequency counter to the RF
output and remove the input signal from the LCP-500-550. Adjust the offset control (located to the right of
the DIP switch) so that the counter reads the correct frequency.
Table 2. F.C.C. Offset Frequencies