beautypg.com

Mythos loudspeakers specifications, Mythos six, Mythos seven – Definitive Technology Mythos Six User Manual

Page 10

background image

VERY IMPORTANT: SETTING CHANNEL BALANCE AND BASS MANAGEMENT SYSTEMS

Dolby Digital and Dolby ProLogic systems and decoders have a critical channel balancing

procedure for the left and right front speakers, center channel, rears and subwoofer (if it is hooked
up through the LFE or Sub Out low level connection) which must be followed if the system is to
perform properly. We have spoken with many system users with problems relating to the overall
sound of their system which could be clearly traced back to improper system balance.

Also note that Dolby Digital decoders have bass management systems (systems which direct the

bass to the various channels) which vary from unit to unit. This bass management system must
also be properly adjusted. If your Mythos loudspeaker is hooked up with speaker level wires and
you are using a separate subwoofer, your receiver or decoder’s bass management system should
be set for “Small” left and right main speakers, “Small” center, “Small” surrounds, and “Yes”
subwoofer. If you are using rear surround speakers with very extended low frequency response,
set the rear channels of your decoder’s bass management system to “Large.” If not, set them to
“Small”. If you are using the Mythos speaker as a rear or side surround speaker, set the rear or
side surround bass management to “Small”. If you are using Mythos loudspeakers without a sepa-
rate subwoofer, set bass management to “Large” left and right main speakers, “Large” center,
“Large” surrounds, and “No” subwoofer. (Also, do not be afraid to experiment.) Remember,
whatever sounds best to you is correct.

All specifications subject to change.

Mythos Six

Dimensions

4.07" W x 4" D x 19.57" H

Frequency Response

60 Hz – 30 kHz

Efficiency:

89 dB

Nominal Impedance

4 – 8 ohms

Driver Complement

Two 3.5" high-definition bass/midrange
drivers, two 3.5" pressure-driven planar low
frequency radiators, one 1" pure aluminum
dome tweeter

Recommended
Associated Amplification

10 – 175 watts/channel

Magnetically Shielded

Mythos Seven

Dimensions

19.57" W x 4" D x 4.07" H

Frequency Response

60 Hz – 30 kHz

Efficiency:

89 dB

Nominal Impedance

4 – 8 ohms

Driver Complement

Two 3.5" high-definition bass/midrange
drivers, two 3.5" pressure-driven planar low
frequency radiators, one 1" pure aluminum
dome tweeter

Recommended
Associated Amplification

10 – 175 watts/channel

Magnetically Shielded

Mythos Loudspeakers Specifications

10

This manual is related to the following products: