Daewoo K480 - Manual (Page 23)

20
Normal timer
f o r e x p e r i e n c e d u s e r s
B R I E F I N S T R U C T I O N
◆ For timer recordings, clock, date, and stations must be set correctly.
◆ Load a cassette with its safety tab in place (page 13) and with sufficient free space for the recording.
Call the video’s "MAIN MENU", choose
"Timer Program".
Decide if you want to record "One Time",
"Daily" or "Weekly"...
... and confirm.
Type in one after the other:
◆ The programme location number,
◆ the time the broadcast starts,
◆ the time the broadcast ends,
◆ the day of the broadcast,
if it is not today.
◆ Select LP if you wish to make a very
long recording (only for DV-K480).
Switch the video off.
If you wish to make changes:
Move to the position you want to change using the
/ button.
Change the setting using the PR+/- or number
buttons.
If all setting are ok, press or , till you see
“OK:confirm” in the last line.
Confirm.
MENU
OK
PR
OK
/
1 2 3
4 5 6
7
0
8 9
OK
2x
PR
How often do you want
to record this program?
One Time
Daily(MON-FRI)
Weekly(Once a Week)
PR+/-:select
OK:confirm MENU:end
TIMER PROGRAM (One Time)
PR+/-:select(AV)
0-9 :setup(PR)
/ :correct MENU:end
PR --
Start Time --:--
End Time --:--
Start Date --/--
Tape Speed SP
TIMER PROGRAM(One Time)
PR 03
Start Time 21:20
End Time 22:20
Start Date 20/09(SAT)
Tape Speed LP
/ :correct
OK:confirm MENU:end
TIMER
*
*
* Tape Speed will not be displayed in DV-K280.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 20