Northern Airborne Technology 240 - Manual (Page 11)

Model 240 Passenger Speaker Amplifier
SM240 Installation and Operation Manual
Section 2 Rev: 1.01 Issue 4 Page 2-5
ENG-FORM: 805-0121.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
2.5 Adjustments and Connections
All internal screwdriver potentiometer adjustments of the Model 240 are set to factory standards. If it is
necessary to change a setting, refer to the calibration and maintenance section of this manual.
2.6 Accessories Required But Not Supplied
Installation kit 240-IKC, consisting of p/n D25SMV-1KC (for 25-pin P40) and D37SMV-1KC (for 37-pin P50),
is required to complete the installation. The kits consist of the following:
D25SMV-IKC
Quantity Description NAT Part #
1
D-min 25 Socket housing 20-21-025
25 MS Crimp Socket 20-26-901
1 25 pin JVL Hood/Locklever 20-28-125
1 D-min Cable Clamp 20-27-189
D37SMV-IKC
Quantity Description NAT Part No
1
D-min 37 Socket Housing 20-21-037
37 MS Crimp Socket 20-26-901
1 37 Pin JVL Hood/Locklever 20-28-005
1 D-min Cable Clamp 20-27-189
2.7 Installation Drawings
DOCUMENT REV. DESCRIPTION TYPE
Installation Wiring Page 1 – Installation Wiring Diagram Block Diagram
Installation Wiring Page 2 – Installation Wiring Diagram - Continued Block Diagram
Installation Wiring Page 3 – Installation Wiring Diagram - Continued Block Diagram
240\521-0 1.01 Passenger Speaker Amplifier Environmental Qual Form
240\240 1.70 Passenger Speaker Amplifier Outline
Section 2 ends following the above documents