Northern Airborne Technology PA700 - Manual (Page 15)

PA700 Series High Power Voice Amplifier
SM44 Installation and Operation Manual
Section 2 Rev: 1.01 Issue 4 Page 2-6
ENG-FORM: 805-0117.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
2.6 Accessories Required But Not Supplied
Installation kits are required to complete the installation. They consist of the following:
2.6.1 Power/Speaker Kit
This kit is used for the Power/Speaker connection. For a straight connection use PAPWR-IKS and for a
right angle connection use PAPWR-IKSR.
PAPWR-IKS consists of
Quantity Description NAT Part No.
1 MS 5 Pin Female Straight Sealed Solder Cup 20-42-001
PAPWR-IKSR consists of
Quantity Description NAT Part No.
1 MS 5 Pin Female 90
° Sealed Solder Cup
20-39-005
2.6.2 Recorder Input Kit
This kit is used for the Recorder input connection. For a straight connection use PAREC-IKS and for a
right angle connection use PAREC-IKSR.
PAREC-IKS consists of
Quantity Description NAT Part No.
1 MS 3 Pin Female Straight Sealed Solder Cup 20-42-003
1 Nut, Shaft Locking ¼" 25-01-002
PAREC-IKSR consists of
Quantity Description NAT Part No.
1 MS 3 Pin Female 90
° Sealed Solder Cup
20-39-003
1 Nut, Shaft Locking ¼" 25-01-002
2.6.3 Microphone Input Kit
This kit is used for the Microphone input connection. For a straight connection use PAMIC-IKS and for a
right angle connection use PAMIC-IKSR.
PAMIC-IKS consists of
Quantity Description NAT Part No.
1 MS 3 Pin Female Straight Sealed Solder Cup 20-42-003
1 Nut, Shaft Locking ¼" 25-01-002