Northern Airborne Technology AA37 - Manual (Page 11)

SM39 Rev. 4.00 AA37 Series Alerting System Manual
Nov 10, 2003 Page 2-1
ENG-FORM: 805-0106.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Section 2.0 Installation
2.1 Introduction
Information in this section consists of: unpacking and inspection procedures, installation
procedures, post-installation checks, and installation drawings.
2.2 Unpacking and Inspection
Unpack the equipment carefully and locate the warranty card. Inspect the unit visually
for damage due to shipping and report all such claims immediately to the carrier
involved. Note that each unit should have the following:
- AA37 Dual Channel Alerting System
- Warranty Card
- Release Certification
Verify that all items are present before proceeding and report any shortage immediately
to your supplier.
Complete the warranty card information and send it to NAT when the installation is
complete. If you fail to complete the warranty card, the warranty will be activated on
date of shipment from NAT.
2.3 Installation Procedures
2.3.1
Warnings
Do not bundle any lines from this unit with transmitter coax lines, or AM audio
rectification may result. Do not bundle any input or output audio, or DC power lines
from this unit with 400 Hz synchro wiring or AC power lines. Do not position this unit or
wiring from this unit next to any device with a strong alternating magnetic field such as
an inverter, or significant audio interference will result.
2.3.2
Cautions
In all installations, use shielded cable exactly as shown and ground as indicated.
Significant problems may result from not following these guidelines, especially with
regard to ground loop noise.