Northern Airborne Technology VR28-013 - Manual (Page 15)

SM32A Rev 4.00 VR28-013 DC/DC Power Converter Manual
2.4
Continued Airworthiness
Maintenance of the VR28-013 is ‘on condition’ only. Periodic maintenance of this
product is not required.
2.5 Accessories Required But Not Supplied
Installation kit p/n VR28-IKC (crimp) is required to complete the installation. The kit
consists of the following:
VR28-IKC 15-pin D-min Female Crimp Kit (NAT Part No. D15SL-IKC)
Quantity Description NAT Part #
1
D-min 15 Socket Housing 20-21-015
15 MS Crimp Socket 20-26-901
1* Jack Screw Set 20-27-002
1* Lock Clip Set 20-27-004
1 15 Pin Connector Hood 20-29-015
* Use as required.
2.6 Installation Drawings
DRAWING REV. DESCRIPTION TYPE SERIAL #
VR28\013\403-0 2.00 DC/DC Power Converter Interconnect 1221 and up
VR28\013\405-0 2.00 DC/DC Power Converter Connector Map 1221 and up
VR28\013\922-0 2.00 DC/DC Power Converter Mech. Installation 1221 and up
Section 2 ends after these Drawings
Aug 21, 2006 Page 2-3
ENG-FORM: 805-0109.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.