4 continued airworthiness, 5 accessories required but not supplied, 6 installation drawings – Northern Airborne Technology AA20-431 User Manual
Page 14

SM22 Rev. 4.10
AA20-431 Cabin PA System Manual
Apr 21, 2004
Page 2-5
ENG-FORM: 805-0106.DOT
Amendment #2
Feb 17, 2009
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
g)
Apply a ground to the +3 dB key. The music heard over the speaker and in the
headsets should drop to 50% of the previous volume.
Upon satisfactory completion of all performance checks, make the required log
entries and complete the necessary Regulatory Agency paperwork before
releasing the aircraft for service.
2.4
Continued Airworthiness
Maintenance of the AA20-431 is ‘on condition’ only. Periodic maintenance of this
product is not required.
2.5
Accessories Required But Not Supplied
Installation kit p/n AA35-IKC-1 (crimp) required to complete the installation consists of
the following:
AA35-IKC-1 37-pin D-min Female Crimp Kit (NAT Part No. D37SV-IKC)
Quantity
Description
NAT Part #
1
D-min 37 Socket Housing
20-21-037
37
MS Crimp Socket
20-26-901
1
37 Pin JVL Hood/Locklever
20-29-370
2.6 Installation
Drawings
DRAWING REV.
DESCRIPTION TYPE
SERIAL
#
AA20\431\403-0
1.03
Cabin PA System
Interconnect 1009 to 1041
AA20\431\403-0
1.10
Cabin PA System
Interconnect 1042 and up
AA20\431\405-0
1.02
Cabin PA System
Connector Map
All
AA20\431\521-0
1.00
Cabin PA System
Environmental Qual Form 2000 and up
AA20\431\905-0
1.03
Cabin PA System (Sheet 1 of 3)
Faceplate
All
AA20\431\922-0
1.01
Cabin PA System
Mechanical Installation 1009 - 1999
AA20\431\922-0
1.10
Cabin PA System
Mechanical Installation 2000 to 2329
AA20\431\922-0
1.20
Cabin PA System
Mechanical Installation 2330 and up
Section 2.0 ends after these Drawings