Northern Airborne Technology NT030x - Manual (Page 11)

VHF Transceiver Manual SM05 Rev 4.00
Nov 26, 2003 Page 1-1
ENG-FORM: 800-0107.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Section 2.0 Installation
2.1 General
Installation information in this section consists of unpacking and inspection procedures,
installation procedures, post-installation checks, and installation drawings.
2.2 Unpacking and Inspection
a)
Unpack the equipment carefully, and locate the warranty card. Inspect the unit
visually for damage due to shipping, and report all such claims immediately to the
carrier involved. Note that each unit should have the following:
Warranty
Card
Release Certificate
Installation Manual
b)
Verify that all items are present before proceeding, and report any shortage
immediately to your supplier.
c)
Complete the warranty card information, and send it to NAT when the installation
is complete. If you fail to complete the warranty card, the warranty will be
activated on the date of shipment from NAT.
2.3 Installation Procedures
2.3.1
Warnings ÍIMPORTANT !
Do not bundle any lines from this unit with transmitter coax lines. Do not bundle any
logic, audio, or DC power lines from this unit with 400 Hz synchro wiring or AC power
lines. Do not position this unit next to any device with a strong alternating magnetic
field such as an inverter or significant interference to operation will result. In all
installations, use shielded cable exactly as shown and ground as indicated.
Significant problems may result from not following these guidelines