NewHank BDP 620 - Manual (Page 10)

GB-10
English
1 (OPEN/CLOSE): Open/close the disc tray.
( POWER): Turn on, or set the player to
standby mode.
2 MUTE
- Press to silence and press it again to resume.
3 REPEAT
Once playback begins, Press REPEAT key on the
remote control to cycle through the various repeat
modes:
- Press repeat until (REPEAT FILE) appears to
‘loop’ the current file.
- Press repeat until (REPEAT All) to ‘loop’ all the
videos selected.
- Press repeat until (REPEAT OFF) to stop the
repeat function.
A-B
When a disc is playing, pressing this button once
will save a “start point” for repeating playback.
Pressing this button again will save an “end point”
for repeating playback. Playback will repeat from
the start point to the end point.
To stop playback from repeating, the REPEAT
button should be pressed until “Repeat: OFF” is
shown on the TV.
Note: [Repeat] & [A-B] may be not available on
some disc due to itself configuration or
because the disc itself can not support the
two features. User can contact the disc
suppliers to acquire the info.
4 Number buttons
- Enter the title/chapter number, etc.
5 HOME
- Invoke the setup menu of the BD player.
6 Menu Navigation Keys
- These keys are used when navigating the
menus on BD and DVDs. They are also used for
navigating the setup menus for the BD player.
7 MEDIA CENTER
- Press to select the playback source. Please
refer to “Using Media Center”.
ANGLE
- Press Angle button during playback to display
the OSD menu, please refer to the On Screen
Display.
AUDIO
- Select the sound track or the language track on
a BD/DVD.
Guide to the Remote Control
The following covers all of the remote’s functions. Refer to the list when necessary.
*1 When playing MPEG-2 movie files or music
files on a DATA DVD, or a music CD, you cannot
use this button.
SUBTITLE
- Select the subtitle language on a BD/DVD.
1
2
3
4
5
6
7