Safety warning – NewHank Playmate User Manual
Page 3
GAIN ADJUSTMENT
1.
Select the Input source (2) and channel while your connected audio device is in playback mode.
2.
Engage the Master/PFL (8).
3.
While still keeping the channel, master and zone rotary’s in “zero” position, now engage the
“PFL” (3) of the corresponding channel.
4.
Adjust the gain rotary till you see the input level in the blue area of the VU-meter bar reading on
average between - 7 and - 2 dB.
5.
Adjust the channel fader to 75% open.
6.
Finally adjust the master fader to the find the desired room level.
7.
Repeat these steps for all line input channels.
SAFETY WARNING
*When installing this mixer, please make sure that the device is not exposed or will not be
exposed to extreme heat, moisture or dust.
*
Do not operate the mixer in extremely hot (more than 40°C /104°F) or extremely cold (less than
5°C/40°F)
surroundings.
*
Keep the unit out of direct sunlight and away from heaters and water.
*
Operate the mixer only after becoming familiar with its functions.
*Do not attempt to operate this mixer if the power cord has been damaged.
*
Never operate this mixer when the covers is removed.
*
To reduce the risk of electrical shock or fire, do not expose this mixer to rain or moisture.
* During long periods of non-use, disconnect the mixer' s main power.
page 3
NEWHANK
Playmate Instruction Manual