NewHank Aerobix User Manual
Page 3
FACE PANEL FUNCTIONS
1.
MIC INPUT 1– Connect a mic with a 6.3 mm plug to this input.
2.
MIC INPUT 2-- Connect another microphone with a 6.3 mm plug to this input.
3.
MIC 1 Volume - Level adjustment for MIC 1.
4.
MIC 2 Volume - Level adjustment for MIC 2.
5.
MIC BASS -- Bass cut or boost level for MIC 1 and MIC 2.
6.
MIC TREBLE --High cut or boost level for MIC 1 and MIC 2.
7.
MUSIC MUTE -- Mutes AUX1 and AUX2 when pushed.
8.
AUX 1 Volume --Level adjustment for AUX 1.
9.
AUX 2 Volume-- Level adjustment for AUX 2.
10.
AUX Bass -- Adjusts the low freq (bass) level for AUX 1 and AUX 2.
11.
AUX Treble -- Adjusts the high freq (treble) level for AUX 1 and AUX.
12.
POWER SWITCH-- illuminates in red when the mixer is powered.
BACK PANEL FUNCTIONS
13.
MAINS CONNECTOR-- IEC socket accepts IEC power lead.
14.
VOLTAGE SELECTOR-- 220-110 AC Volt Switch (factory set on 220v).
15.
MASTER OUT RCA-- Asymmetrical master output.
16.
MASTER OUT XLR-- Symmetrical master out.
17.
MASTER VOLUME -- Level adjustment of the RCA and XLR Output.
18.
MIC 1 RELEASE -- the further turned clockwise the longer it takes before the
Signal from AUX1 or AUX2 returns.
19.
MIC 2 RELEASE -- the further turned clockwise the longer it takes before the
Signal from AUX1 or AUX2 returns.
20.
SENS-- Talk over Sensitivity adjustment for MIC1 and MIC2, MAX when turned
clockwise.
21.
AUX 1-- RCA Stereo line level input AUX 1.
22.
AUX 2-- RCA Stereo line level input AUX 2.
23.
MIC 2 INPUT-- MIC 2 XLR balanced input.
24.
MIC 1 INPUT-- MIC 1 XLR balanced input.
Aerobix Instruction manual page 3