Nevion DA-3GHD-8-PL - Manual (Page 6)

DA-3GHD-8-PL / DA-3GHD-8 Rev. D
nevion.com | 6
Cable equalization, DA-3GHD-8.
Format Min. Typical Comments
SD-SDI 300m Belden 8281
BER< 10E-12
Total length of cable included
patching between modules
325m
HD-SDI 150m Belden 1694A
BER< 10E-12
Total length of cable included
patching between modules
200m
3GHD-SDI 70m
100m
Cable equalization, DA-3GHD-8-PL, single unit.
Format Min. Typical Comments
SD-SDI 200m 1 , 2 Belden 8281
BER< 10E-12
Total length of cable included
patching between modules
225m 2,3
HD-SDI 50m 1,2 Belden 1694A
BER< 10E-12
Total length of cable included
patching between modules
75m 2,3
3GHD-SDI 30m 1,2
40m 2,3
Cable equalization, DA-3GHD-8-PL, two looped units.
Format Min. Typical Comments
SD-SDI 200m 1,2 Belden 8281
BER< 10E-12
Total length of cable included
patching between modules
225m 2,3
HD-SDI 50m 1,2 Belden 1694A
BER< 10E-12
Total length of cable included
patching between modules
60m 2,3
3GHD-SDI 25m 1,2
25m 2,3
Cable equalization, DA-3GHD-8-PL, three looped units.
Format Min. Typical Comments
SD-SDI 175m 1,2 Belden 8281
BER< 10E-12
Total length of cable included
patching between modules
200m 2,3
HD-SDI 30m 1,2 Belden 1694A
BER< 10E-12
Total length of cable included
patching between modules
50m 2,3
3GHD-SDI 15m 1,2
20m 2,3
1 Measured with the following parameters at the limits of the standards simultaneously;
Amplitude (+/- 10%), Ambient temperature (0ºC/45ºC), Generator jitter:
-
SD-SDI: 10Hz-10kHz: >1 UI 10kHz – 10MHz: >0.2 UI
- HD-SDI: 10Hz-100kHz: >1 UI 100kHz –150MHz: >0.2 UI
- 3GHD-SDI: 10Hz-100kHz: >2 UI 100kHz –300MHz: >0.3 UI
2 Specified termination at the loop end required. 75 ohm terminations mounted at all unused output ports for HD-SDI
and 3GHD-SDI required.
3 Well within limits of standards