Nevion DA-3GHD-8-DUAL - Manual (Page 9)

DA-3GHD-8-DUAL Rev. A
nevion.com | 9
3
Configuration
The DA-3GHD-8-DUAL supports a number of different formats. The correct configuration can
either be set with a DIP switch or with GYDA Control System. The layout of the main module
is shown in the drawing below with the DIP switch to the upper left position.
Figure 2: DA-3GHD-8-DUAL module layout
DIP switch configuration must be set according to Table 1:
Switch
#
Label Function DIP=OFF Function DIP=ON Comment
1 ---
2 ---
3 ---
4 CD Cable detect OFF Cable detect ON Cable driver
function for
extended cable
length
5 ABYP No auto bypass Reclocker bypass if
unsupported bitrate Auto bypass of
reclocker
6 RCL Reclocker Bypass Reclocker ON Reclocker
mode
7 EQ Cable equalizer Bypass Cable equalizer ON Equalizer
mode
8 OVR GYDA control
Config. with GYDA
Override GYDA control
Config. with DIP switch Select GYDA
config. mode
Table 1: DA-3GHD-8-DUAL DIP switches
All DIP switches are off when pointing towards the release handle.