2 specifications – Nevion SDI-CHO-2x1-PB User Manual
Page 5

SDI-CHO-2x1/ SDI-CHO-2x1-PB
Rev. E
nevion.com | 5
2 Specifications
Electrical Input
Number of inputs:
2
Data rate NRZ:
1 to 540 Mbps
Equalization:
Automatic (typical up to 300m Belden
8281A)
Cable reclocker can be bypassed to
support
bit rates down to 1Mbps.
Impedance:
75 ohm
Return loss:
>15dB @ 540MHz
Signal level:
nom. 800mV
apx. 200mV min. when equalizer switched
to Bypass
Connector:
BNC
Electrical Output
Number of outputs:
4
Connector:
BNC
Impedance:
75 ohm
Return loss:
>15dB @ 540MHz
Jitter:
max 0.2UI
Peak to peak signal level:
0.8V 0.1V
Signal polarity
2 outputs non inverting, 2 outputs inverting
Features
Re-clocking:
Automatic clock rate detection
Supported clock rates: 143, 177, 270, 360
and 540 Mbps
Electrical
Power:
+5V DC / 3W Max.
Control:
Control system for access to setup and
module status
With BITE (Built-In Test Equipment) for
use with Multicon Gyda Control System
Supported standards
SMPTE:
SMPTE259M, SMPTE305.2M,
SMPTE310M, SMPTE344M
DVB-ASI:
EN50083-9