Nevion 3GHD-EO-D15xx - Manual (Page 7)

3GHD-EO-D15xx Rev. 2
nevion.com | 7
3 Configuration
3.1 Format configuration
The 3GHD-EO-D15xx can support a number of different formats. The correct configuration
can either be set with a DIP switch or with the GYDA System Controller. The layout of
3GHD-EO-D15xx is shown in the drawing below with the DIP switch to the upper left
position.
Figure 2: 3GHD-EO-D15xx.xx board layout
DIP switch configuration must be set according to the table below:
Switch # Label Function, DIP = ON Function, DIP = OFF Comment
1 RCL1 Reclocker ON Reclocker Bypass Reclocker mode
2 EQ Cable equalizer ON Cable equalizer Bypass Equalizer mode
3 RCL2
Not used
4 R1
5 R2
6 E/O
7 D/B
8 E/O
9 DOP
10 OVR Override GYDA
control
Config. with DIP
switch
GYDA control
Config. with GYDA Select configuration
from GYDA
All DIP switches are off when pointing towards the release handle.