Nevion FR-2RU-10-2 - Manual (Page 5)

FR-2RU-10-2 Rev. N
nevion.com | 5
2. Specifications
2.1 General specifications
AC Power: PWR-AC15/15/5/5V
AC power supply module 100-260 VAC.
DC Power (optional): PWR-DC15/15/5/5V
DC power supply module 36-72 VDC.
Redundant Power
(optional): PWR-AC15/15/5/5V or
PWR-DC15/15/5/5V.
Dimensions: 483 x 88 x 178 mm (19”, 2RU).
Card slots: 10.
Power Supply slots
(reserved): 2.
Internal voltages: +5V, -5V, +15V, -15V.
2.2 Front view
The front view of the sub-rack shows status LEDs for each module that is included in
the sub-rack + two green LEDs for the power supply modules.
Figure 1: LEDs in front of the Flashlink sub-rack.
The uppermost LED of each module card is a "general status" LED.
- Green light means that the card is OK.
- Red light means that the card is faulty.
- No light means that the power is not switched on.
The meaning of each LED on the module cards is described in their respective
manuals.
2.3 Rear view
Figure 2 shows an example of a fully equipped Flashlink sub-rack, seen from the rear
side.
To the left is the connector module for the power supply delivered with the sub-rack.
The other connector modules are described in their respective user manuals.
Figure 2: Example of fully equipped Flashlink sub-rack.