6 installation of the adapter for fresh air kit – Drolet ESCAPE 45221 User Manual
Page 12
11
2.6 Installation of the adapter for fresh air kit
In order to avoid some combustion problems, it is highly recommended to install an adapter for fresh air kit.
To do so, you need to have the accessory #AC01298. Using pliers, remove the metal rectangle (A) located on
the side of the insert. Choose the side that is best for your installation. Then, install the adapter for fresh air
kit (B) using 4 screws (C). Secure the flexible pipe (E) (non-supplied part #AC02090) to the adapter (B)
using one of the pipe clamps (D). Secure the other end of the pipe to the outside wall termination (F) using
the other pipe clamp (D). The outside wall termination (F) must be installed outside of your home.
Figure 2.6