MultiDyne DVI-ONE - Manual (Page 4)

Instruction Manual, DVI-ONE INTRODUCTION 4
INTRODUCTION
The MultiDyne DVI-ONE Series lets your digital flat panel display extend up to 1,000
meters (3,300 feet) away from host by TMDS digital signal transmission with only 1(one) fiber.
The DVI-ONE supports the following:
• High Speed and long distance transmission by SC type Multi-mode 1(one) Fiber
• Self detecting function for EDID information
• Corresponding to T.M.D.S signal (Single link)
• The use of standard DVI plug and SC fiber connector.
• R, G, B and Clock signal is transmitted by 1(one) multimode optical fiber
• Maximum resolution WUXGA
• Optional external power supply (Automatic power switch is included.)
PACKAGE CONTENTS
Before you start installing the DVI-ONE, please check the package contents for:
• Transmitter unit with designation “COMPUTER”- 1each
• Receiver unit with designatuion “MONITOR” - 1 each
• Power Adapter (5VDC , 2A) - 2 each
• User's Manual - 1 each
INSTALLATION
The product is composed of a transmitter and a receiver. The transmitter unit is imprinted
with the designation “COMPUTER”. The receiver unit is imprinted with “MONITOR”. The
COMPUTER unit should be connected to the PC computer or source DVI output port. The
MONITOR unit should be connected to the DVI input port of digital display. The DVI-ONE
COMPUTER and MONITOR units are to be used with Multimode fiber optic cable of 50/125 or
62.5/125um with one SC connector. Please see the picture below.
SC Type Fiber Optic Connector