MultiDyne FMX-GE-1000 - Manual (Page 5)

9
1.6 Panel
The LAN Speed and FX Speed LEDs
use dual color to indicate speed.
Green indicates Fast Ethernet (100M).
Yellow indicates Gigabit Speed.
When off, the LAN Speed LED
indicates a 10M speed.
Factory reset procedure
Apply power to
unit .
Allow 30 seconds to fully boot.
Using a pencil or ball-point pen, press the
'DEFAULT' recessed push-button switch (located
on the face plate) and hold for 6 seconds. The unit
will be restored to factory default almost
immediately. The defaults are:
Figure 1. Panel Graphics
IP=10.1.1.1
netmask=255.255.255.0
GW=10.1.1.254
password reset to 'admin'
1 x SFP port, supports any
155M or 1.25G transceiver
LED Indicators
Power
FX Link
Lan Speed
Fixed
GbE Optical
Transceiver
DEFAULT:
Use to recover from lost password or to return
all settings to factory default values.
LAN Lnk
FX Speed