Mr. Coffee SCTX Series - Manual (Page 8)

brewing has started in the selected brew strength.
The FRESH BREW™ TIMER feature will start.
NOTE: EMPTY AND CLEAN CARAFE AND PLACE IT
UNDER THE BREW BASKET BEFORE BREWING.
As a safety feature, your coffeemaker will NOT start
again automatically the next day. If you want your
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set
DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW:
Press the DELAY BREW button until all lights turn off
(Figure 9).
CLEANING AND MAINTAINING YOUR COFFEEMAKER
Daily Cleaning
• Always unplug the coffeemaker and allow to cool
before cleaning.
• Remove and wash the filter basket, permanent filter
(not included on all models), carafe and carafe lid in
a solution of hot water and mild liquid soap.
• Never use abrasive cleansers, steel wool pads or
other abrasive materials.
CAUTION! Never immerse the coffeemaker
itself in water, in any other liquid or place in
the dishwasher.
Regular Cleaning and Maintenance
Your coffeemaker is equipped with a clean indicator/
function. The Clean Function is critical to optimize the
performance of the coffeemaker. The clean function
will remove minerals (calcium/limestone) found in water
that leave deposits in your coffeemaker and affect its
14 15
The Fresh Brew™ Timer Feature
The Fresh Brew™ Timer feature lets you know
how long your coffee has been waiting for
you. At the start of the brew cycle, the Fresh
Brew™ Timer feature will automatically be
activated. The timer will appear in the lower
part of the display under the clock (Figure
8). This display will be visible any time you
are brewing coffee. The display will change to show the
time since brewing began in 15 minute intervals.
Light Tube feature
The Light tube technology allows you to see how much
coffee is left in the carafe. As the carafe fillls up, each
light window will turn black. This will let you know
how full the carafe is. As you pour the coffee out of
the carafe, each window will turn clear indicating how
much coffee is left (Figure 8).
BREWING COFFEE LATER
1. You must first set the time for when you would like
the coffeemaker to begin brewing your coffee as
described in Setting the Clock and the Delay Brew
Timer section.
2. Prepare your coffeemaker as
described in Adding Water and
Ground Coffee section.
3. To activate the DELAY BREW function
and program your coffeemaker
to brew coffee at a later time, press the DELAY
BREW button once. The coffeemaker is now set
to automatically brew coffee at the pre-set time
(Figure 9).
4. At the pre-set time, the BREW NOW light will turn on
and the DELAY BREW light will turn off, indicating the
Figure 9
Figure 8