Monster HTS1000MKIII User Manual
Page 13
7
MONSTER HTS 1000 MKIII POWERCENTER FEATURES
Cable/Satellite/Antenna Coaxial Connection: “IN” connects the coaxial cable from either wall cable outlet, satellite
dish or TV antenna. “OUT” connects the coaxial cable to input of TV, DVR, cable box or satellite receiver.
ON/OFF Switch: This switch turns the PowerCenter on and off. The switch lights up when turned to the ON position,
providing power to components plugged into the switched outlets. Pressing the switch to the OFF position shuts off power
to switched outlets. Components plugged into unswitched outlets (Always On) still receive power, however, provided
the PowerCenter is plugged into a 120V outlet.
Video Interference Reduction Filter (“Always On” Unswitched Outlets): These outlets have a special filter circuit
that is designed to reduce interference to your video components. Make sure to match the appropriate identification label
to each component’s power cord.
Digital Voltage Display: Displays line input voltage in Volts (V).
Always On Indicator: Individual LED indicates the Always On (unswitched) outlet is receiving power when the power
center is plugged into the wall outlet.
PROTECTION ON Indicator: Indicates that the internal surge protection of the PowerCenter is active.
GROUND OK Indicator: Indicates the wall outlet that the PowerCenter is plugged into is grounded.
Telephone Input/Output: Allows you to hook up to telephone lines (RJ11) and protect your system against power surges
coming from them.
Network Input/Output: Allows you to hook up to Ethernet lines (RJ45) and protect your system against power surges
coming from them.
Audio Filter (Switched Outlets): These outlets have a special filter circuit that reduces noise from the AC power line
that goes to your audio components. Match the appropriate identification label to each component’s power cord.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.