Install completed, After installation completed – MicroLinks UM03 - install manual User Manual

Page 12

Microscope Installation Instruction

3.1.4

Install Completed

Click “finish” to complete Driver Install program. See Fig 3-5.

Fig.3-5 Driver installation completed

3.1.5

After installation completed

After installation is completed, the window on the right corner will show a video icon

Fig.3-6. Start -> all programs will find Device Driver shown as Fig.3-7.

Fig.3-6 USB Video Device icon

MICROSCOPE can be executed from ICON AMCap as below Fig.3-6. However, AMCap is a

simple tool for preview only and can’t support image process as the MICROSCOPE AP.

Fig.3-7 USB Video Device is at all programs position.