Dynacord PowerMate 2200 - Manual (Page 3)

Technical Specifications: Mixing desk in rated condition: Unity Gain ( MIC Gain 20 dB ), all faders position 0 dB,
all pots in mid position, master fader + 6dB, amplifier rated output power into 8 ohms, one channel driven, unless otherwise specified.
Maximum Midband Output Power, 1 kHz, THD
≤
1% PowerMate 1000 PowerMate 1600 PowerMate 2200
into 4 ohms 2 x 570 W 2 x 570 W 2 x 760 W
into 8 ohms 2 x 340 W 2 x 340 W 2 x 430 W
Rated Output Power, 20 Hz ... 20 kHz, THD
≤
0.2%
into 4 ohms 2 x 500 W 2 x 500 W 2 x 700 W
into 8 ohms 2 x 250 W 2 x 250 W 2 x 350 W
Maximum Output Voltage of power amplifier, no load 58 Vrms 58 Vrms 63 Vrms
THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu
< 0.006% < 0.006% < 0.006%
Power amplifier input to Speaker L/R output < 0.05% < 0.05% < 0.05%
DIM 30, power amplifier < 0.015% < 0.015% < 0.015%
IMD-SMPTE, power amplifier, 60Hz, 7 kHz < 0.15% < 0.15% < 0.15%
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output
15Hz ... 60kHz 15Hz ... 60kHz 15Hz ... 60kHz
Any input to Speaker L/R output 30Hz ... 40kHz 30Hz ... 40kHz 30Hz ... 40kHz
Crosstalk, 1kHz
Fader and AUX-Send attenuation
> 80 dB > 80 dB > 80 dB
Channel to channel > 70 dB > 70 dB > 70 dB
CMRR, MIC input, 1kHz > 80 dB > 80 dB > 80 dB
Input Sensitivity, all level controls in max. position
MIC Input
-74 dBu (155 µ V)
Line Input (Mono) -54 dBu (1.55 mV
Line Input (Stereo) -34 dBu (15.5 mV)
Power Amplifier Input + 6 dBu (1.55 V)
Maximum Level, mixing desk
MIC inputs
+ 11 dBu + 11 dBu + 11 dBu
Line inputs + 30 dBu + 30 dBu + 30 dBu
All other inputs + 20 dBu + 20 dBu + 20 dBu
Record Send output + 16 dBu + 16 dBu + 16 dBu
All other outputs + 20 dBu + 20 dBu + 20 dBu
Input Impedances
MIC
1.8 kohms 1.8 kohms 1.8 kohms
Insert Return 2.2 kohms 2.2 kohms 2.2 kohms
EQ Input and 2 Track Return 8 kohms 8 kohms 8 kohms
All other inputs > 15 kohms > 15 kohms > 15 kohms
Output Impedances
Record Send
1 kohms 1 kohms 1 kohms
Phones 47 ohms 47 ohms 47 ohms
All other outputs 75 ohms 75 ohms 75 ohms
E quivalent Input Noise, MIC Input, A-weighted, 150 ohms -130 dBu -130 dBu -130 dBu
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down
-92 dBu -92dBu -92dBu
Master fader 0 dB, Channel fader down -89 dBu -87dBu -85dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity -83 dBu -81dBu -79dBu
Signal/Noise-Ratio, power amplifier, A-weighted 104 dB 104 dB 106 dB
Equalization
LO Shelving
± 15 dB / 60 Hz
MID Peaking, mono inputs ± 15 dB / 100 Hz ... 8 kHz
MID Peaking, stereo inputs ± 12 dB / 2.4 kHz
HI Shelving ± 15 dB / 12 kHz
Master EQ, 2x7-band ± 10 dB
Phantom Power 24V DC 24V DC 24V DC
Mains voltage (factory configured) 100V/120V/230V/240V AC/50-60Hz
Power Consumption at 1/8 maximum output power, 4 ohms 600 W 670W 1100W
Dimensions, (WxHxD), mm 508.5x210.3x478.7 667.5x210.3x478.7 826.5x210.3x478.7
Weight, including lid 20 kg 24kg 29kg
Optional Goosneck Lamp, 12V/2.4W, 12”, XLR 112 700 112 700 112 700
Footswitch FS11 110 693 110 693 110 693
Rack-Mount-Kit(PowerMate 1000) NRS 90220 112 698