Metz MECABLITZ 36 AF-5 digital - Manual (Page 77)

ķ
77
• When taking a series of flash shots at full light output and
fast recycling times as provided by accu’s operation, make
sure to observe an interval of at least 10 minutes after 15
flashes, otherwise the flash unit will be overloaded.
• The mecablitz may only be used in combination with a
camera-integrated flash unit if the latter can completely be
folded out!
• Quick changes in temperature may cause condensation.
Therefore give the flashgun time to acclimatize!
2 Supported dedicated functions
2.1 mecablitz 36 AF-5 C
• Flash ready indication in camera viewfinder
• Automatic flash sync speed
• TTL flash control
• E-TTL flash control
∆ Manual TTL-flash exposure correction
∆ Flash exposure storage FE
x AF measuring beam control
• Programmed auto flash mode
• Wake-up function for flash unit
∆ = Dedicated function is performed by the camera or must be
set on the camera.
x = Some cameras only support the AF illuminator integrated in
the camera.
709 47 0253.A1 36AF-5-CNOPS 28.06.2010 9:42 Uhr Seite 77