D-Link DP-G321 - Manual (Page 5)

5
External Features
Port Connectors
The DP-G321’s two USB ports and parallel port are located on its rear panel. The
printer port can be configured using the PS Admin program or the print server’s
Telnet interface. (See the PS Admin User’s Guide, available on the CD that came
with the DP-G321, for information about configuring the print server’s ports.) The
Print Server also supports web configuration permitting users to configure settings
through the web browser. The default IP Address is as follows:
„ Default IP Address – 192.168.0.10
„ Subnet Mask – 255.255.255.0
The DP-G321 offers extraordinary flexibility, operating with all major network
operating systems and protocols:
TCP/IP
UNIX lpr/lpd
Windows NT/2000, Windows 95/98SE/Me, Windows XP
NetWare 5.x NDPS LPR Remote Printing
NetBEUI
Windows 2000/XP, Windows 95/98SE/Me, Microsoft LAN
Manager, IBM LAN Server
AppleTalk
MacOS EtherTalk
Windows-based setup and administration software, PS Admin, is supplied with
the Print Server, making configuration and management quick and easy. The
Print Server also supports configuration and management via the Telnet protocol
for networks without Windows-compatible systems.
Note:
The PC’s IP Address must be in the same subnet as the Print Server’s IP Address for the
two devices to communicate. (For example, if your Print Server’s IP Address is
192.168.0.10, with a subnet mask of 255.255.255.0, then your computer’s IP Address
should be 192.168.0.x, where x is a value between 1-254, excluding 10.)
„
„
„