Methven Tahi Satinjet Handset - Manual

Notes:
After installation all connections ●
must be checked for leaks.
All installations must be carried ●
out in compliance with relevant
water regulations.
Issue A 435022
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
Australia
1300 638 483
UK
0800 195 1602
TAHI SATINJET HANDSET AND HOSE/
HANDSET AND HOSE WITH WALL OUTLET
BRACKET
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 1.5 bar, Max 5 bar.
If supply exceeds 5 bar, a pressure
limiting valve must be installed.
Operating Temperature:
Max 70°C.