MEGAPOWER ML51 - Manual (Page 11)

11
- Use the UP button to highlight ON then press OK on the remote controller to select
- Use the UP/DOWN button to select your network name, then press OK to select.
- When password input window appears, press OK again on the remote controller to
display the soft keyboard. Input the network password then press BACK on the remote
controller to hide the soft keyboard.
- Use the DOWN button to highlight OK then press OK on the remote controller to
select.
- Once connection is made “connect successfully !”indicates at the bottom of the screen
and a check mark against the name of the network
- Use the LEFT button to high light the PROJECTOR NETWORK SETTING box
- Use the UP/DOWN button to highlight the then press OK, “Configuration OK !”
will be shown at the bottom of the screen.
- Set the android device to connect to the WIFI DLP Projector-xxxxxx
- On the media device, start the EZVIEW application
- Connect to the deviceWIFI DLP Projector-xxxxxx
- Select the INTERNET option from the MENU Bar
Connecting to AV Source
-
Using the supplied AV cable, insert the stereo plug end to the pico projector then a standard
RCA AV cable (not supplied) to the RCA connectors from a video source
- On the home screen select AV. The projector automatically detects and displays image
corresponding to the source