MEGA Corp. MAC-INSP-RSP-5 - Manual (Page 11)

MAC/MAT-INSP-RSP-5
4 Feb 2014
SECTION 2
Scheduled Maintenance Inspections
2-2
FREQUENCY
STEP
CONTROL SYSTEM
WEEKLY
(150 HRS)
BI‐WEEKLY
(250 HRS)
MONTHLY
(500 HRS)
QUARTERLY
(1000 HRS)
SEMI‐ANNUAL
(2500 HRS)
ANNUALLY
(5000 HRS)
1
Check all electrical cables for security and
damage. X
2
Disconnect, clean and coat Deutsch
connector junctions with Dielectric grease
X
3
Check all hydraulic solenoids and hosing
for security and leaks.
X
4
Check water cannon/nozzle assembly for
security leaks and condition. Repair as
required.
X
5
Check foam agent supply hoses and shut‐
off valve for security condition and
evidence of suction leaks.
X
6
Check all in‐cab control functions for
proper operation. Repair and replace
control components as required.
X
7
Check all in‐cab control functions for
proper operation. Repair and replace
control components as required.
X
8
Check hose reel for security mounting and
leaks. X
9
Unreel the entire length of hose,
pressurize hose and check hose and
nozzle for security, wear and leaks.
X
STEP
MAC STRUCTURE
150 HRS
(WEEKLY)
250 HRS
(BI‐WEEKLY)
500 HRS
(MONTHLY)
1,000 HRS
(QUARTERLY)
5,000 HRS
(ANNUALLY)
150 HRS
(WEEKLY)
1
Check filler port trash screen for debris
and inspect assembly for security and
damage. Repair or replace trash screen as
required.
X
2
Visually inspection tank exterior for
damage and evidence of leaks. Repair as
required
X
3
Drain tank and remove water pump sump
access cover. Remove trash and inspect
sump area for damage.
X
4
Check all lights (turn signal, brake,
backing, parking, clearance, and work) for
proper operation. Replace lights as
required.
X
5
Check all interior tank structure for leaks,
cracks and condition of epoxy coating (if
equipped). Repair structure and coatings
as required.
X
6
Check body pad and guides for cracks,
security and damage. Repair or replace as
required.
X