McCall Series II Reach-Ins with ABS Interior - Manual (Page 2)

McCall Series II Reach-Ins with ABS Interior Service and Installation Manual
For customer service, call (888) 732-2446 Fax (800) 669-0619, www.mccallrefrigeration.com
2
Serial Number Information ........................................................2
Receiving & Inspecting Equipment ...........................................2
Specifications .............................................................................3
Installation ...............................................................................4-5
Operation ....................................................................................6
Maintenance ............................................................................7-8
Wiring Diagrams ...................................................................9-13
Refrigeration Package Diagram ...............................................14
Replacement Parts ..............................................................15-16
Standard Labor Guidelines ......................................................17
Standard Warranties ...........................................................18-19
The serial number of all self-contained Series II McCall reach-
ins with ABS interior refrigerators and freezers is located
above the door under the shroud.
Always have the serial number of your unit available when
calling for parts or service. A complete list of authorized
McCall parts depots is available at www.mccallrefrigeration.
com.
This manual covers standard units only. If you have a custom
unit, consult the customer service department at (888) 732-
2446.
©2010 McCall. All rights reserved. Reproduction without written permission is
prohibited.
Contents Serial Number Information
Even though most equipment is shipped crated, care should be
taken during unloading so the equipment is not damaged while
being moved into the building.
Visually inspect the exterior of the package and skid or
container. Any damage should be noted and reported to the
delivering carrier immediately.
If damaged, open and inspect the contents with the
carrier.
In the event that the exterior is not damaged, yet upon
opening, there is concealed damage to the equipment
notify the carrier. Notification should be made verbally as
well as in written form.
1.
2.
3.
Request an inspection by the shipping company of the
damaged equipment. This should be done within 10 days
from receipt of the equipment.
Be certain to check the compressor compartment housing
and visually inspect the refrigeration package. Be sure
lines are secure and base is still intact.
Freight carriers can supply the necessary damage forms
upon request.
Retain all crating material until an inspection has been
made or waived.
4.
5.
6.
7.
Receiving And Inspecting The Equipment
Upon powering unit, there could be up to
a 10 minute delay before unit begins to
cool.