MBM Corporation EBA 435 E - Manual (Page 35)

- 35 -
A
Paper cutting test. If the last sheet or several
sheets are not completely cut, gradually turn
the knob for blade depth adjustment (A)
¼ turn to the right until the paper is cut along
the entire length. Do not set too low as blade
will become blunt sooner.
Danger! Do not turn main switch to
position "0" whilst blade is moving
upwards or downwards!
Risk of injury!
Danger! Blade must always be covered
by the pressing bar (see picture below on
the left).
Clamping Blade
OK
OK
•
Blade and cutting stick replacement
•