MBM Corporation TRIUMPH 5551-06 EP (9 STEP MODULE) - Manual (Page 28)

- 28 -
123456789012345678
123456789012345678
123456789012345678
123456789012345678
EBA 551-06 • EBA 551-06 LT
A B
C
E
D
E
D
A
B
Take the exchange blade carefully out of the
blade box and screw it to the blade changing
tool (
D).
• Check, if when using the upper threads (B),
the blade ( E) is protected.
• The blade is not protected
➞ Use the lower
thread ( C) for fixing. The screws (A) may not
exceed at the rear side of the blade.
Danger!
Blade ( E) must be protected.
Mount the blade with the blade changing
tool (
A) ...
... and tighten with screws ( B) in upper
position.
Blade must be in the upper position.
• Blade and cutting stick replacement •