頁面 15, Operation, Cor recting folding or stapling misalignment – MBM Corporation AUTOBOOK User Manual
Page 15

Cor recting Folding or Stapling Misalignment.
Fold the book manually to make the center line on the book.
Check the staples aligning with the center line or not.
Fine adjustment by following the instruction below.
Center line
Center line
Repeat Step 3. Until stapling align with center line.
Adjustment
Staple position
Align with
center line
No
1. Press
Key.
2. Press
shift to 4.S-Adj.
Indication
3. Press
Key.
4. Press
move the paper to left.
(Paper move left 0.14mm for 1 digit)
5. Press
return to Ready .
1. Press
Key.
2. Press
shift to 4.S-Adj.
3. Press
Key.
4. Press
move the paper to right.
( Paper move right 0.14mm for 1 digit)
5. Press
return to Ready .
Staple located on the right
side of the center line.
Staple located on the right
side of the center line.
Yes
1. Go to next step 4.
Operation
P.14
- TRIUMPH 4860 (48 pages)
- TRIUMPH 5260 (36 pages)
- IDEAL 4002 (11 pages)
- IDEAL 2404 (56 pages)
- IDEAL 0101 HDP (20 pages)
- IDEAL 0201 OMD (40 pages)
- IDEAL 2403 (28 pages)
- IDEAL 3105 SMC (44 pages)
- IDEAL 2502 (11 pages)
- IDEAL 4109 CC (18 pages)
- IDEAL 4006 (12 pages)
- IDEAL 2600 (10 pages)
- IDEAL 8220 (8 pages)
- IDEAL 2501 (24 pages)
- AL1 (1 page)
- QuickJog paper jogger (1 page)
- Paper Drill 200 single spindle (14 pages)
- MBM 25 (8 pages)
- Maxxum 91 corner stapler (12 pages)
- LJ 3000 (2 pages)
- LEOWORK PAPER LIFT (12 pages)
- HIGH CAPACITY STACKER (16 pages)
- FMM3 (24 pages)
- ES 8000 (32 pages)
- ES 5500 (20 pages)
- ES 5000 (16 pages)
- IM 8100 (13 pages)
- CORNER STAPLER (20 pages)
- ES 2000 (14 pages)
- ES 3000 (20 pages)
- AJ 700 (13 pages)
- AEROCUT NANO (30 pages)
- BC 12 (38 pages)
- FC 10 TWIN TOWER SYSTEM (12 pages)
- AEROCUT (42 pages)
- AEROCUT G2 (58 pages)
- DocuVac (27 pages)
- DocuVac Installation (6 pages)
- 49 (26 pages)
- 46 (17 pages)
- 46 Installation (13 pages)
- 49 Installation (4 pages)
- OMR (5 pages)
- 45 (29 pages)
- Spine Pro Bookletmaker (16 pages)