MBM Corporation IM 8100 - Manual (Page 8)

7> Open the cover and install the interface guide.
When installing the top guides like the picture, make sure they are completely attached to the shaft of
the machine. Push the top guide towards the bottom shaft until they are clicked and are properly
fixed to the shaft. Also make sure the sensors on the Left side of the rollers are picked up by the top
guide magnets.
8> Adjust the Folding positions on upper/lower cassette according to the paper size
Æ Please refer to the fold manual
9> Check whether the operation panel displays “ready online.”
10> Place the printer on the printer slide mount base.This picture below is showing with optional raiser
8